After a long period of use, crossed roller bearings will experience various conditions due to wear and tear, which will affect the use of the bearings. It is a common situation that the bearings have abnormal noises during use. There are many reasons for the abnormal noises of the bearings. There are different solutions to the cause of the formation of the cross roller bearing. The following Xiaohong will introduce the causes and solutions of the abnormal noise of the cross roller bearing.

1. Reasons for abnormal noise of cross roller bearings
01
bearing wear
When the inner and outer raceways of the bearing have bumps, dents or serious faults, it will cause abnormal noise in the cross-roller bearing, and defects such as surface impact and scraping of the rolling elements will also cause smooth and crisp sound in the cross-roller bearing. After a long period of use, the bearing is prone to wear and tear, resulting in damage to the meshing relationship between the bearing and the bearing and the shaft, causing the shaft to deviate and resulting in periodic vibration pulses.
02
Shaft clearance too small
The axial clearance of crossed roller bearings generally requires that the rotational clearance be as small as possible, but if the rollers in the raceway are squeezed too tightly, the axial clearance is too small, resulting in increased frictional resistance, and the rolling elements and cage pockets There is a violent collision between them, resulting in abnormal noise.
03
Into foreign matter
For example, some impurities, iron filings and other foreign matter enter the raceway running area of the bearing, which will cause severe friction with the rollers in the raceway. At this time, even a small amount of dust will cause the bearing to vibrate periodically or non-periodically Pulse, resulting in abnormal noise of the bearing during operation.
04
Insufficient lubricant performance
Cross roller bearings use lubricating oil with poor performance or poor quality of lubricating oil, which will cause abnormal noise during the use of the bearing. Improper bearing seals lead to oil or grease leakage, friction between the rolling elements and the grooves of the cage, and vibration pulses caused by the grinding lubricant of the rolling elements during operation, causing abnormal noise in the bearing.
Second, the solution to the abnormal sound of cross roller bearings
01
Replace in time after wear and tear
After the crossed roller bearing has abnormal noise, check the surface of the bearing to see if there is any collision or damage. If there is a problem with the bearing, it needs to be replaced in time, because the slight problem in the bearing will also affect the operation of the bearing. make an impact.
02
Adjust the gap
If the gap of the crossed roller bearing is too small, its additional torque will increase. Therefore, when abnormal noise occurs, you can also check whether the gap is too small and try to adjust the gap.
03
Replace lubricating oil
The selection of lubricating oil has a great influence on the performance of the bearing, so more attention should be paid to the selection of lubricating oil. The lubricating oil has a great influence on the bearing speed, load noise, wear and corrosion.

