Is The Higher The Bearing Speed, The Better? The Professional Answer Is Here

Apr 25, 2022

Leave a message


The maximum allowable speed of the bearing, that is, the limit speed, decreases with the increase of the bearing diameter series and width series. Bearing samples or design manuals list the limit speed nlim values of various types and sizes of bearings. The test conditions are that the equivalent dynamic load P<=0.1C (C is the basic dynamic load rating), the cooling conditions are normal, and the test conditions are Maximum permissible rotational speed for class 0 tolerance bearings.


However, since the limit speed is mainly limited by the temperature rise during operation, it cannot be considered that the limit speed in the sample is an absolutely unsurpassable limit.

image

For each bearing, it has its own limit speed. The speed of the bearing is mainly limited by the temperature rise caused by the friction and heat inside the bearing. When the speed exceeds a certain limit, the bearing will not continue to rotate due to burns, etc. Even the bearings are stuck.


Therefore, we are rotating the appropriate bearing type according to the speed of the bearing, so we need to understand the requirements for selecting the bearing at the lower speed. In some applications, other factors are more important than the limit speed. Such as: low speed, reciprocating swing, etc.

The limit speed of the bearing refers to the limit value that does not generate frictional heat that causes burns and can rotate continuously. Therefore, the limiting speed of the bearing depends on the type, size and precision of the bearing, as well as various factors such as the lubrication method, the quality and quantity of the lubricant, the material and type of the cage, and the load conditions.

The limit speed given by the bearing manufacturer generally refers to the highest speed that can be achieved under the agreed conditions: for example, the bearing tolerance is 0; the bearing clearance is 0; the bearing load is 10% of the rated load; the lubrication and cooling conditions are normal; The core bearing only bears the radial load, the thrust bearing only bears the axial load; the temperature of the outer ring does not exceed 100 ℃, etc.

The speed range required by the application helps to decide what type of bearing to use. Most bearing manufacturers' product catalogs provide the limit speed value of their products. Practice has proved that it is better to work under 90% of the limit speed.


Send Inquiry