1. Miniature bearings: Every 10 to 15 sets of bearings are loaded into a plastic cylinder, and each 5 to 10 plastic cylinders are loaded into a paper box (or bag, package).
2. Medium and small bearings: multiple sets of bearings are wrapped with polyethylene film, external kraft paper or polyethylene composite paper; multiple sets of bearings are packed into a plastic cylinder (box); single sets of bearings are packed in polyethylene film bags, folded Or seal the bag mouth and put it in a paper tray.
3. Large bearing: Packed in polyethylene film or polyethylene composite paper, then put into a paper box; use polyethylene film bag, single set of folded bag mouth, then put into a paper box; single set into Plastic box; single set of three-layer wrapped package: polyethylene film tape or composite paper tape for the inner layer, fastening tape for the middle layer, and waterproof plastic tape for the outer layer.
4. Large bearing: single set of three-layer wrapped package (same as above); single-layer four-layer wrapped package: after wrapping the above three layers, the outer layer is wrapped with a layer of linen.
For separable tapered roller bearings with an outer diameter of ≥150mm, the polyethylene film should be placed before the inner and outer components before packaging, or the inner and outer components should be separated into single packages. For interchangeable cylindrical roller bearings with an outer diameter of ≥150mm, the package can be easily wounded, and the inner and outer components can be used to separate the single package.
