The FAG bearing arrangement includes not only rolling FAG bearings but also components related to FAG bearings, such as shafts and FAG bearings.Lubricant is also a very important part of the FAG bearing configuration, because the lubricant to prevent wear and corrosion, so that the FAG bearing can play a full role.In addition, the sealing is also a very important part, the performance of the sealing is crucial to the cleaning of the lubricant.Keeping them clean has a profound impact on the life of FAG bearings, which is why lubricants and seals have become part of the business.
The designer of the FAG bearing configuration will see the necessary basic information provided in the order of the general requirements.Obviously, it is not possible to include all the information required for every conceivable FAG bearing application.For this reason, we will mention comprehensive application engineering services in several places, including technical support for proper selection of FAG bearings and how to perform complete FAG bearing configuration calculations.The higher the technical requirements for FAG bearing configurations and the more limited the experience of using FAG bearings in specific applications, the more this service should be utilized.
Each individual decision affects the performance, reliability, and economy of the FAG bearing configuration.The amount of work required depends on experience in matching similar FAG bearings.More work, such as more accurate calculations and/or tests, is required in cases of inexperience, special requirements, or the need to give special consideration to the cost of the FAG bearing configuration and any other subsequent configuration.
The information included in the technical synthesis section is generally applicable to ordinary rolling FAG bearings, or at least to a set of FAG bearings.If exact information about a particular FAG bearing is required only, it can be found in the relevant text before the corresponding section of the classification table.It should be noted that load and velocity values and fatigue load limits appear in the product table as rounded approximations.
