With the continuous improvement of my country's urban infrastructure, tunnel boring machines (TBMs) have become indispensable "pioneers" in the fields of urban subway construction, railways, highways and water conservancy projects.
It can travel unimpeded in hard rocks, achieve continuous, high-speed and precise tunnel excavation, greatly improve construction efficiency, and reduce the risk of workers directly contacting the tunnel working surface. Therefore, in subway lines in first-tier cities such as Beijing, Shanghai and Guangzhou, TBM has almost become the main construction method, and it can be called a capable worker in modern infrastructure construction.

If you want to do your job well, you must first sharpen your tools. TBM can shine in various fields, and stable and reliable performance support is indispensable. The engineering solutions provided by Timken provide a solid backing for the stable operation of TBM, helping tens of thousands of TBMs to tunnel through mountains and excavate freely.
Excellent performance, "carrying" heavy responsibilities
Timken® high-performance Tapered roller bearings

As a complex engineering machinery, TBM is mainly composed of cutterhead, cutterhead propulsion system, cutterhead support system, earth pressure balance system, conveying system and other parts. Among them, the cutterhead bears the important function of cutting rocks, which requires "excellent" skills.
Whether in hard rock or soft rock geological conditions, cutterhead bearings usually need to withstand large radial and axial loads. Timken® high-performance tapered roller bearings perform well, which can extend TBM operation time, improve operating efficiency, reduce the frequency of cutterhead maintenance and thus reduce downtime costs.

Keep improving and fearless challenges
Solutions tailored for TBM
Over the years, tunnel boring machines have experienced rapid development, and many studies and improvements have been made in cutterhead design, tool management and tool lubricants. Since the first 19-inch cutterhead was launched in 1989, Timken has continuously responded to challenges in limited cutterhead space, improving bearing load capacity and extending bearing life.
No.1
Meeting the challenges of heavy loads and eccentricity
When operating in hard rock formations, especially granite, bearings face two major challenges: heavy loads and easy eccentricity. The ultra-pure steel and optimized internal geometry used by Timken can give bearings extremely high rated load capacities; the contour design of the raceway or rollers for specific working conditions can significantly reduce boundary stresses and evenly distribute loads to improve bearing performance.

No.2
Meeting the challenge of sealing
When the cutterhead seal is weakened or fails, silt and dust in the tunnel will invade the bearing, causing the raceway to peel and surface damage. Timken uses a carburizing heat treatment process to effectively slow down the expansion of raceway pits. At the same time, Timken also uses diamond-like surface coating technology for rollers to achieve ultra-fine surface finish, enhance the self-repair ability of the raceway, and improve the wear resistance of the bearing to ensure stable operation of the bearing under polluted conditions.
No.3
Meeting the lubrication challenge
When the hob is close to the center position, the operating speed will decrease and the heat dissipation effect will also become worse. This low-speed and high-temperature state poses a huge challenge to the lubrication performance of the bearing.
Because insufficient lubricating oil film will lead to direct contact between the rolling element and the raceway surface, it is easy to cause early peeling of the raceway surface after long-term operation. Timken has reduced the requirements for the thickness of lubricating oil on the contact surface of the separation raceway by fine grinding the raceway surface. This means that even in the case of insufficient lubrication, the bearing can have a relatively longer service life.
No.4
Meeting the torque stability challenge
The proper setting of the bearing preload is crucial to performance. If the positive clearance is too large, the bearing load area will become smaller and the cutter head rigidity will be insufficient; conversely, if it is too tight, the bearing roller will be subjected to excessive force, and even the starting torque will increase, resulting in increased wear and damage to the bearing.
Currently, most cutter head manufacturers rely on spring scales or torque wrenches to measure the bearing installation torque to ensure that the preload is ideal. Timken has effectively improved the torque stability of bearings through internal design and special manufacturing control codes, thereby further ensuring the reliability and service life of bearings.
From application engineering and product release to supply chain and end-user services, Timken is committed to providing globally consistent and reliable products and services. Adhering to the concept of innovation-driven, Timken will continue to improve the reliability and efficiency of equipment through key applications such as tunnel boring machines, promote interconnection, and escort the future global infrastructure construction.
