Do You Know How to Install Automobile Bearings?

Jun 12, 2024

Leave a message

In life, the number of cars is increasing, and the demand for wheel hub bearings on cars is also increasing. Correctly installing the wheel hub bearings can increase the driving safety factor of the car. Excessive wear and bearing damage, if not replaced in time, will bring certain hidden dangers to driving safety.

Classification of automobile bearings

 

Single-row tapered roller bearings

◆ Its inner ring and outer ring can be installed separately;

◆ Can be used for rear wheels with drum brakes (such as Santana rear wheels);

◆ Has higher load-bearing capacity and relatively low speed;

◆ Small installation space and easy to install;

First-generation hub bearings

◆ Fixed, pre-set bearing clearance;

◆ Lifetime lubrication, maintenance-free;

◆ Permanent seal;

◆ Seals are divided into: rubber oil rings, combined oil seals;

◆ Compact structure;

info-568-449

 

Second-generation hub unit

The second-generation hub bearing combines the advantages of the first-generation economy and integrates a hub flange for mounting brake discs and wheel rims. The second-generation hub bearing is a compact bearing unit with fixed, pre-set bearing clearance, lifetime lubrication (maintenance-free), and sealing.

◆ Integrated with a hub flange;

◆ Certain pre-set bearing clearance, integrated with hub flange;

◆ Rolling flange technology, fully preloaded;

◆ The retaining ring provides axial tension on the outer ring of the bearing and firmly fixes the bearing;

◆ Multiple sensors can be integrated in the sealing ring to support ABS (anti-lock braking system), ASR (drive anti-skid device), ESP (electronic stability system);

info-647-491

 

Third generation hub unit

The third generation hub bearing is a highly integrated hub bearing unit with a mounting flange for mounting the brake disc and a flange for mounting the steering knuckle to ensure the highest running accuracy. The integrated speed decoder provides the signals required for ABS/ESP suspension control. The clamping force of the hub bearing is activated and adjusted via an annular boss.

◆ Compact structure, high load-bearing capacity, lifelong lubrication, sealing;

◆ Reduced shaking, improved driving comfort;

◆ High-precision brake disc and wheel guide;

◆ Double flange design, no need to adjust bearing clearance during installation, easier installation;

◆ Higher reliability and longer service life;

Precautions for bearing installation

info-548-687

 

1. Do not knock the bearing under any circumstances;

2. It is recommended to replace the hub bearing coaxially;

3. Bearings with magnetic coding rings cannot be installed upside down;

4. Do not attempt to disassemble the hub bearing or adjust the seal of the hub unit;

5. Do not touch the magnetic coding ring of the bearing, and the bearing needs to be kept away from magnetic fields;

6. In any case, the correct method needs to be used to assist the appropriate tools for installation;

7. The construction needs to be carried out in a dry and clean environment. Do not open the packaging of the bearing before installation;


 

Send Inquiry