
Bearings are widely used in various machines. It can be said that any running machine cannot do without bearings, and bearings are the key components of motorcycles.
Since most of the mechanical parts of motorcycles are exposed, they are subjected to the severe test of high-speed rotation in harsh driving environments. This requires motorcycle bearings to meet good durability and high sealing to extend the service life of motorcycles.
Motorcycles vary according to different models and structures, but each motorcycle is generally equipped with 20 to 30 bearings. These bearings are used in important rotating parts that support driving, such as engines, transmissions, and wheels. They are responsible for reducing friction and ensuring that the power of the engine is effectively transmitted to the wheels.
Performance of motorcycle bearings
● Smooth rotation through low friction and low vibration;
● Foreign matter resistance and high rigidity;
● Durability must be ensured;
The bearings for motorcycle engines and transmissions are required to be foreign matter resistant and high rigidity because they are used under high temperature, high-speed rotation and large impact loads in foreign matter environments. In addition, wheel bearings must be suitable for use in various terrains and for various purposes, so they must also be durable against water, mud, etc.
Engine applications
Crankshaft
Main bearings: ball bearings, cylindrical roller bearings
Connecting rod: crankpin cage bearings
Timing operation
Camshaft: needle bearings, ball bearings
Auxiliary equipment
Starter: needle bearings
Oil pump: needle bearings, ball bearings
Transmission applications
Drive shaft and transmission shaft
Ball bearings and roller bearings and slotted lightweight plastic cage bearings for idler wheels
Clutch
Clutch release bearing
Shifting
Ball bearings, needle bearings
Chassis applications
Chassis
Ball bearings, needle bearings, tapered roller bearings, angular contact ball bearings, thrust needle bearings
Universal shaft
Cross joint
Common models of motorcycle bearings
Motorcycles generally use ball bearings in the internal transmission system and wheels of the engine, flat ball bearings on the front fork, and needle bearings on the crankshaft connecting rod and some transmission gear shafts.
Generally speaking, the front wheels of cars under 100cc are 6200, 6201, 6300, 6301 and the rear wheels are 6301;
For cars of 125cc and 150cc, the front wheels are 6301 and the rear wheels are 6202, 6302, 6200, 6201, 6202, 6203, 6204, 6205, 6206, 6300, 6301, 6302, 6000, 6001, 6002, 6003, 6004, 62/22, 62/28, 62/32, 63/22, 63/28, 63/32 are also commonly used.
Causes and analysis of early damage
1. Bearings on the front and rear wheel hubs and rear chain disc
★✪ Because the owner wades too deep or washes the car frequently during daily use, water enters the bearings, causing the grease in the bearings to gradually fail, resulting in serious wear of the rolling grooves and balls in the bearings, and a significant increase in clearance;
★✪ If the front and rear wheels are assembled too tightly or too loosely when leaving the factory or selling, it will cause unstable driving over time, bearing stagnation or loose bearing displacement, ball retainer damage or fall off, resulting in excessive clearance, causing friction between the brake disc and the wheel hub, increasing driving resistance;
★✪ The bearings on the rear chain disc are very easy to get into water or be adjusted too tight or too loose, which will cause damage. Therefore, car owners should pay special attention when washing the car or passing through deep puddles, and check and maintain them in time. If damaged, the replacement must be in place, and the wheel must be adjusted to rotate flexibly without obvious clearance.
2. Crankshaft connecting rod reducer roller bearings and ball bearings on both sides
Generally, two-stroke engines are more susceptible to damage. The main reasons for the damage of connecting rod roller bearings are: the oil quality is too poor or the oil volume is too small.
★✪ When the engine is working, the temperature is too high, which aggravates the friction heat generation and softens the surface, and the fatigue peeling of the working surface occurs prematurely. The peeled particles enter the cage of the steel column, causing the operation to be blocked; the rollers generate abnormal loads on the cage, aggravating the wear of the cage, causing the cage to break and break, and the crankshaft connecting rod is locked.
★✪ If the oil replaced by the four-stroke engine is a counterfeit product or the service life is too long, the lubrication effect is reduced, the wear is aggravated, and impurities are easily generated to block the oil channel; after the assembly or overhaul of the new car, the hard foreign matter brought by the tools used during the calibration enters the bearing groove, causing the bearing to rotate obstructed; the non-concentricity of the crankshaft press or the crank misalignment during installation increases the bearing rotation load and causes damage.
3. Bearings on the rear wheels of the chartered vehicle
Generally, the rear shock absorber of the chartered vehicle is a single support with a large load capacity. If the vehicle does not slow down even in bad road conditions, it is easy to cause wear and tear, which will affect the service life. It is easy to get water when washing the car, so please pay attention.
4. Upper and lower bearings of the steering column
Due to the failure of the front shock absorber, insufficient lubrication or inappropriate upper and lower tightening force, the ball is broken or the working surface of the ball is peeled off, resulting in the steering of the steering handle being stiff or deviating, which affects the safety of driving.
In summary: Bearing damage is mainly caused by factors such as poor lubrication, inadequate installation, improper clearance and poor use environment. If it is not discovered or repaired early, it will cause great losses or affect driving safety. Therefore, please pay attention to manufacturers, dealers, maintenance industry and car owners to avoid such accidents.
