Gearbox bearing application technology is the technology for bearings applied in the gearbox environment. The research target is the bearing and the research environment is the gearbox. At the same time, the application technology of gearbox bearing is an "application technology", not the design and manufacturing technology of the bearing itself.
From one perspective, we are discussing how to better apply standard bearings in gearboxes. rather than redesigning the bearing, where cost and versatility would be limited in most conditions.
On the other hand, although it is feasible to carry out special bearing design for some special working conditions, we still hope to find an existing solution that can solve this problem before that. Therefore, the understanding of the existing bearing technical scheme and application knowledge has become the most reasonable and effective guide for finding this scheme.
Gearbox bearing application technology, as the intersection of gearbox technology and bearing technology, poses many challenges to engineers and technicians.
First of all, it not only requires engineers to have a good understanding of the application technology of gearbox bearings, including the design and manufacturing of the gearbox, as well as the application environment and working conditions of the gearbox. Secondly, it is also necessary to have a certain understanding of the characteristics and operating requirements of components such as bearings and gears. Therefore, for gearbox engineers and bearing engineers, it is a test of comprehensive ability, and it is a comprehensive discipline that requires experience accumulation.
It is not difficult to find a contradiction in actual engineering practice: on the one hand, bearings are the key components of gearbox failures, and there are many problems in practical applications, which have a significant impact; on the other hand, the application technology of bearings in gearboxes is neither the gearbox engineer's. The core technology is also not the core technology of bearing engineers. This "critical" but not "core" technical status brings difficulties for engineers on both sides to solve the application problems of gearbox bearings.
