NSK has revised the basic dynamic load rating*1, a parameter for calculating the life of rolling bearings, and extended the basic rated life*2 (calculated life) of rolling bearings.
This revision applies the "NSK's world's first Micro-UT test method that can accurately predict life (click at the end of the article to read the original text)"*3, released in March 2023, to major types of rolling bearings (applicable objects: deep groove ball bearings, angular contact ball bearings, self-aligning ball bearings, cylindrical roller bearings and tapered roller bearings).
NSK's world's first Micro-UT test method for accurate life prediction, released in March 2023, has been put into practical use, improving the basic dynamic load rating, a parameter for calculating the life of rolling bearings
Due to the increase in the basic dynamic load rating, the basic rated life (calculated life) is extended by up to 2 times
Smaller bearings can be replaced, contributing to the miniaturization and lightweighting of customers' machinery
By replacing small products, the bearing torque is reduced, energy consumption during the product use phase is reduced, and CO2 emissions are reduced, contributing to the realization of a carbon-neutral society
NSK's world's first Micro-UT test method
"NSK's world's first Micro-UT test method for accurate life prediction" can calculate the life of NSK bearings more accurately than ever before. This calculation method is now applied to NSK bearings, increasing the basic dynamic load rating, which is one of the parameters for calculating bearing life. For example, with this revision, the basic rated life (calculated life) of radial roller bearings can be extended by up to 2 times.
*1: Basic dynamic load rating: The load capacity of a rolling bearing can be expressed as the load that the inner ring can rotate 1 million times without changing direction and size when the outer ring is stationary.
*2: Basic rated life: The total number of revolutions at which 90% of a batch of identical bearings operate independently under the same conditions without spalling due to rolling fatigue.
*3: "Accurate life prediction using Micro-UT testing method": Technology that makes high-precision predictions of the spalling life of rolling bearings based on the size and number (statistical data) of non-metallic inclusions in steel. (Patent application completed)
Effects of this revision
By increasing the basic dynamic load rating, customers can fully utilize the long life performance of NSK bearings in mechanical design. The following effects are expected.
1. Contribute to miniaturization and lightweighting of machinery
By increasing the basic dynamic load rating of the bearing, it can be used in a higher load environment, so the original bearing can be replaced with a smaller bearing.
Example: Tapered bearing HR32306J can be replaced with a smaller HR33206J. By replacing the bearing, miniaturization (bearing outer diameter is reduced by about 14%, and bearing installation width is reduced by about 13%) and lightweight (bearing weight is reduced by about 38%) are achieved.

2. Contribute to the realization of a carbon-neutral society
Replacing existing products with smaller bearings saves resources in the production process.
Due to the increase in the basic dynamic load rating, smaller bearings can be replaced, so the bearing torque is lower than before. This reduces energy consumption and reduces CO2 emissions during the product use phase.
Example: Tapered roller bearing HR32306J can be replaced with a smaller HR33206J. It is estimated that after replacement, the bearing torque and energy consumption can be reduced by about 18%, and the annual electricity*4 can be saved during the product use phase. About 48kWh, equivalent to reducing CO2 emissions*4 by about 22kg.

*4: All calculations are based on our standards.
